Sunday, April 20, 2008

Outlook Safelist aggregation

You use Exchange 2007 Content Filtering Agent for spam fighting, there is sometimes occasions when it classifies mail as spam even though it’s not. Content Filtering Agent is using a whitelist that is managed from outlook or OWA. This whitelist is by default not propagated to to your Edge servers or hub server if you have installed antispam agents on it. There is two steps to make this happen, first users must enter addresses into the safelist next step is for the administrator to aggregate this information and save it into AD user object.

This list can be edited in outlook by clicking ToolsOptionsJunk E-mail buttonSafe Senders tab. There is also an option here and there in outlook that says “Add Sender to Safe Senders List”. The list itself is stored inside each user mailbox located on the Exchange mailbox server.

Ok, so how can you get Exchange 2007 Edge server or if you have Exchange HUB/Transport server with antispam agents installed to read this info?

It will not happen automatically, the administrator must make this happen. The easiest way is to run Update- Safelist cmdlet on a scheduled basis. What this command does is reading the safelist inside users mailboxes and writes this info to users AD account. Email addresses are hashed before saved into msExchSafeSendersHash attribute so information cannot be read and used in a bad way.

If you’re using Exchange 2007 Edge server, the edge-sync process will synchronize this attribute from Active Directory to ADAM that Edge server leverage each time edge-sync is run.

The complete process is.
· User adds addresses to there’s safelist with help of outlook
· Administrator run the Update-Safelist cmdlet (this should be set up with a scheduled task)
· If you don’t have Edge servers and have antispam agents installed on your HUB/Transport server, you’re done, Content Filtering agent on Edge server have to wait for this info until edge-sync runs.

End users should not expect that there safelist will work at once because the Update-Safelist must be run and also the edge-sync process.

example
· mail from someone@microsoft.com is sent to user1
· user1 has no info in the safelist
· mail gets a high SCL value and is either blocked or rerouted to Junk E-mail folder

But if the user1 has someone@microsoft.com in the safelist and the administrator has run outlook-safelist command, content filter agent will set a SCL value of -1 to the mail and it’s therefore not blocked by content filter agent.

But if someone@microsoft.com is sent the same mail to user2 it will get the high SCL value and either be blocked or rerouted to Junk E-mail folder. You see the safelist is personal to each user.

You can see what mail and why Content Filter agent is blocking mail in the agent log file, default located in C:\Program Files\Microsoft\Exchange Server\TransportRoles\Logs\AgentLog

There is also a performance counter that is good to look at when dealing with Safe-Senders. Performance Object is “MSExchange Content Filter Agent” and the counter is “Bypassed recipients due to per-recipient Safe-Senders”. This number will tell you how many mail that have bypassed content filter agent because users have added mail addresses to there’s safelist.


How to schedule the safelist aggregation.

Create a powershell script file ex. “C:\Batch\safelist-aggregation.ps1”
You only need one line of code in that file.
Get-Mailbox where {$_.RecipientType -eq ‘UserMailbox’ } Update-Safelist -Type Both
This will update the safelist from all user mailboxes.
There may be need for filter the Get-Mailbox cmdlet in so you not get all mailboxes in the search but only those located on a specific server or databases.
“Get-Mailbox –Server …”
“Get-Mailbox –Database …”


Create a scheduled task to run the powershell script.
C:\WINDOWS\SYSTEM32\windowspowershell\v1.0\powershell.exe -PSConsoleFile "C:\Program Files\Microsoft\Exchange Server\Bin\ExShell.psc1" -Command C:\batch\safelist-aggregation.ps1

How often the scheduled task is run, is up to the administrator to decide. Factors are Active Directory replication, site layout, number of users to collect safelist from etc.
By enabling safelist aggregation users will be happier since mail from there’s contacts and safelist will not end up as spam in the Junk e-mail folder.

6 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. When I edited my address book in outlook,computer accidentally went off and I lost my contacts.In three days I found tool for recover it,and it became-ost pst convert.Utility is free as wrote on site from I downloaded it.Besides that program convert all information from Microsoft Exchange (files with the .ost extension) into files of the Microsoft Outlook mail client (.pst files) - OstToPst procedure.

    ReplyDelete
  3. I know good way for solve problems with mails-pst repair program.This tool helped me not once and everewhere.Besides that it is free as far as I know and can extract data from corrupted files with *.pst or *.ost extension.

    ReplyDelete
  4. Hi,

    I have read somewhere that safelist aggragation could work for all users. So user1 adds an emailadres to his safelist and then the Content Filter will bypass that adres for ALL users.

    Can this be done?

    GtZ

    ReplyDelete
  5. Safelist aggregation is only for personal use.
    To whitelist an address or a domain the administrator must configure the addresses with "Set-ContentFilterConfig" and the parameters BypassedRecipients,BypassedSenders and BypassedSenderDomains.
    See http://technet.microsoft.com/en-us/library/aa996791(EXCHG.80).aspx for help with the cmdlet

    ReplyDelete
  6. Your blog is very nice.These tools are really very helpful...:-)

    ReplyDelete